Bowman Magnet Motor Open Sourcing Project

Status: Project commenced Dec. 2003 with claim to a working device, which later, after three months, ended up running down due to demagnetization.  No replications were accomplished though several were attempted.


You are here: PES Network Inc > Open Sourcing Projects > Magnetic Motors > Bowman > Images > AutoCAD > Ken Hegemann

AutoCAD Rendition by Ken Hagemann

Click here for AutoCAD file (*.DWG) (1 MB; SolidWorks 2004)
Click here for *.DXF file (136 kB) http://tinyurl.com/254ch

Note: Images were originally black with white lines and text.  They are reversed here to save on toner when printing this page.

Intro

Sent: Wednesday, January 07, 2004 12:38 AM
Subject: FreeEnergy.GreaterThings.com Contact

Sterling,
 
Attached is the .jpg of the autocad drawing of my rendition of the Bowman motor.
The primary changes I have made include:
- Placing the rotors in a horizontal plane
- Adding timing positioning holes
- Adding thrust positioners on the horizontal shafts for easy adjustment
- Includes ball bearings
- CNC generated rotors
 
Sincerely,
 
Ken Hegemann

AutoCAD Images

Overview Image  (click on section to go to enlargement)

by Ken Hegemann

 

Framework


click for negative

 

Frame with Shaft


click for negative

 

Unit with Rotors


click for negative

ERRATA: "The center gear should say 144 teeth, not 72." (Ken; 1/7/04)

Comments

From: KenH2K@aol.com
To: sterlingda@greaterthings.com
Sent: Wednesday, January 07, 2004 11:34 AM
Subject: FreeEnergy.GreaterThings.com Contact

Sterling,
 
[...] Regarding the shape of the rotors, I do have a number of  very specific reasons for the shape which will become evident once the unit is assembled.  I will explain in detail in due course.  I have noted however at the base of the drawing that the rotors can be round. [...]
 
Thanks, 
 
Ken Hegemann

See also

 

Posted by Sterling D. Allan, Jan. 7, 2004
Last updated November 06, 2004
visits since Jan. 1, 2004

www.PureEnergySystems.com
Copyright © 2003, 2004