|
|
|
IntroductionDec. 14, 2003 Douglas Mann says he has successfully built a working Bowman Permanent Magnet motor. The approximate 1-foot-square device puts out 9 inch-pounds of torque, and can turn under load. With no load, the main shaft spins at 30 rpm. It does not accelerate to destruction but reaches a maximum speed and goes no faster. "You can run it as long as you want," he said. [See "issues"] Purportedly, there are other working magnetic motors in operation in other places around the planet, but none are currently accessible for view by the world at large. This Bowman device successfully replicated by Douglas Mann may be the first to be made thus available, along with a complete set of instructions of how to replicate it. One of Mann's friends his dismantled his motor and rebuilt it, and was able to successfully get it to work; and important milestone. Mann used the instructions given at http://www.freeenergy.co.za/, among other places; but introduced some modifications of his own in order to get the device to work. His is a scaled up version: 8-inch main rotor rather than 4 inches. I have been in communication with Doug Mann by phone, and he has related a complete set of instructions of how to build one of these devices. This page presents a complete set of instructions, given freely, with his permission. Photos and video footage are pending but are not necessary for successful replication. Where Next
Page composed by Sterling
D. Allan, Dec. 14, 2003 |
|
|
www.PureEnergySystems.com |
Bowman
Magnet Motor Open Sourcing Project
