|
| |
http://tinyurl.com/2ffhp
You are here: Pure Energy
Systems > Open Sourcing > Magnetic
Motors > MXLO > Replications
MXLO Magnet Motor Replications
Last updated June 27, 2004 02:36:27 PM MST
Working (Claims; Not Verified)
- Thomas Jean of MXLO says he knows
of 4 or 5 of these devices that are presently operable (including
his). No evidence has been presented to support this claim.
Declines requests for visits, videos, conference call.
- Neweid - "It turns but
only about 15 rpm sometimes 20 if I adjust the air gap." Request
sent to Nuweid on Mar. 8 to verify and provide additional info. No
response as of Mar. 31.
- Mystery PES_MXLO person - " there may already be a successful
unit that was built by a member of your discussion group. This based on an
email that was sent telling me how they have gotten their rotor to spin very
quickly for a few seconds" -- Thomas Jean (Mar.
8, 2004) No such person has come forward as of Mar. 31 to
corroborate this statement.
- Ken Hegemann - Was not able to
get it to work, after much effort per the instructions and including direct
communication with MXLO.
- tip_alias - Was not able to get
it to work, after much effort per the instructions and including direct
communication with MXLO.
- Joe Friday - built to
specs. No rotation.
- Retrorocket59 - Was not able
to get it to work, after much effort per the instructions and including
direct communication with MXLO.
- Chris Horianopoulos,
built March 13, 2004; not working.
- Wayne Jones, full-scale
completed March 14, 2004; not working
- Ronnie Madden, from
Scottsville, Kentucky; has built device but it does not work.
- Kenneth Gerke - built March 7,
2004; not working. Shaft needs to be more stable.
- Mike Bellino - completed, doesn't work (reported by phone to
Sterling, March 14, 2004)
- Ed Anderson - completed to
specs March 25, 2004; doesn't work.
Built with Some Variation; Not Working
- Dann McCreary
- Photos & Observations from 1/2-size Build Attempt; Flux Lines Photos
 
- Tero Ranta - built March 12;
drilled holes for screws to hold magnets. not working.
- Daniel Stockwell -
completed, doesn't work; is willing to let someone else take it and and try
and get it to work.
- John Clingan - built March 18,
using rectangular magnets in stator; doesn't work.
- Dave - June 27, says he wants to try
a circular rendition instead of triangular.
Others Doing Replications
Index created by SDA
March 4, 2004
Last updated June 27, 2004
MST
| |
|
